Products

Customise your own package to suit what you and your bike need most. These services can also be added to a package that you're booking in.

We'll take your bike back to the workshop for a thorough going over - will be shiny and clean on return - normally next day.

Removal, clean and assessment of bottom bracket and related components. Cleaned re-greased and reinstalled.

Install new brake, dropper, gear shifters as required

Remove old brake cable, and housing (if required). Replace and lube new cable and housings. Adjust callipers and pads for best performance. Price is per brake.

Bleed brake line and run in new brake fluid. Degrease and lube components. Test braking effectiveness. Price is per brake.

Replace those weathered or damaged brake lines with new ones. Lines will be cut to length to suit the bike, re-attached, filled with new brake fluid, bled and tested for firmness.

Remove old part and install the new. There will be an additional charge if brakes need bleeding as well.

Remove rotor and decontaminate - check wear and re-install to manufacturers specs.

Minor adjustments to brake cables, pads and inline barrels to improve braking performance. Price is per brake.

Cane Creek headset

ultegra  shifters

XT rear derailleur

cannondale cable rim brakes

Shimano hollowtech ranks

Shimano 2x11 drivetrain

A chain dipped in hot wax is as good as it gets for drivetrain lubrication. Your chain, cassette and chainring will all last much longer, remain cleaner and run smoother after a good waxing … not unlike a roadies legs! Book your waxing in now … and then get the legs done!

Perfect mid year tune up to keep everything running well. Within a couple of hours your bike will feel and run a whole lot better. Includes all the services of the Tune and Go plus some extra attention given to the most important moving parts and systems of your bike. This is a favourite of ours to do and "bang for buck" it makes such a big difference - your bike will thank you.

Includes removal of old component, clean and de-grease and installation of new parts to manufacturers specs. We can install the new parts you've already purchased, or we can order your parts as required.

Install components to spec and test. Extra $35 for Routed cable or hydraulic systems. Price is installation only of your parts, or we can source the components for you.

We'll get your dropper post or suspension remotes working well again. Often a clean and re-grease does the trick, sometimes a kinked cable needs t be replaced, or adjusted to work optimally.

New fork installation - includes cutting to size and fitting headset components as required. Price is installation only of your parts, or we can source the correct components for you.

Complete strip down of freehub, degrease and rebuild.

Degrease freehub and surrounds, check for play and tighten as required. Check pawl and meshing mechanism, regrease and reassemble

Remove old freehub body, degrease area, install new freehub to manufacturer specs, grease and reassemble drivetrain. Price is installation only of your parts, or we can source the correct components for you.

Complete rebuild of the drivetrain including bottom bracket, cranks, chainring(s), chain, cassette, freehub and derailleur(s). Price is for the installation, lubrication and tuning only. We can source the parts, or can install the new parts that you have already.

All components of the drivetrain will be disassembled, inspected, thoroughly cleaned and re-installed, greased and tested to be running smooth.

Tuning of front or rear gear systems (incl cables, housing, derailleur, chain, cassette / chainring to get them working a well as they possibly can.